永康市龙德工具有限公司

    中文 English
发布日期:2016/11/11 点击量: 7608

 Cut brick machine, mainly used for general clay brick do compression test sampling or other non-metallic materials for cutting purposes.
1. Cut the brick of the wheel, you must install the protective cover. Brickwork application of silicon carbide wheel, must have a factory certificate. Installation should check whether the grinding wheel cracks or moisture, to confirm qualified before use. 2. Not forced squeeze adjustment pedal leaving the cut brick grinding wheel by the load is too large; pressure, the wheel pieces easily broken. Cut the brick at the beginning, the pedal can not be pressed too heavy.
3. Cut the brick, the cut part of the width of not less than 10mm, cut brick process, shall not change the direction and location of bricks, to prevent the torn cracked grinding wheel.
4. Cut-tiles Operators should wear protective glasses, masks and gloves.
5. Cutting machine in the process of mechanical failure, should immediately cut off the power, is strictly prohibited in the mechanical operation of repair parts.
Cutting efficiency, no noise, no dust flying, cutting the size of accurate and high utilization of materials.
4. Gross weight / net weight 230 / 180kg
5. Voltage power 380V / 2.2kw
Rack, knife, brick device, wide adjustment clamping device and transmission.

 

Previous: Cut brick machine attention

Next: None

Copyright © 2016 Yongkang Longde Tools Co.,Ltd  All Rights Reserved.